Electric Connection Check; Fuse Check And Replacement; Fuse Box - Zetor PRIMO HT 20 NC Operator's Manual

Electric Connection Check

(1) Loose wire connections may cause contact failure and damaged wiring can lead to degraded electrical
equipment performance, short circuit and fire. Replace or repair damaged wiring.
(2) If the cable insulation is damaged, wrap it with insulating tape.
(3) If the fasteners or cable ties are damaged, secure the cables with clamps.
(4) To eliminate fire, have the wiring checked regularly once a year at the service center.

1 - Fuse Box

1- Normal Condition
2- Open Circuit

Fuse Check and Replacement

Fuse Box
Fuses are installed on the tractor to eliminate a possible accident in the event of an electrical circuit failure.
If the electrical system does not work while driving, check that the fuse is not blown.
1. Remove the fuse box cover.
2. Remove the blown fuse.
3. Install a new fuse with the same rating.
4. The function and rupture capability are indicated on the fuse box cover.
Warning:
If a fuse other than the one specified is used, the wiring may overheat and cause a fire. Never

use a fuse with a different rupture capacity. Never use steel wire or foil instead of a fuse.
MAINTENANCE
PRIMOHT20NC_0110
PRIMOHT20NC_0111
107