Universal Joint - Zetor PRIMO HT 20 NC Operator's Manual

1- Mid PTO Shaft

2- Universal Joint

3- Coupler
Universal joint
1- A
2- Connection
3- Universal Joint
1. Pull the universal joint coupler backwards.
2. Push the universal joint on to the shaft of the mid PTO until the coupler is locks.
3. Try moving the universal joint back and forth to make sure it is securely locked.
NOTE
Finally, pull the universal joint to make sure it is locked on the PTO shaft.

Rear Link
1 - Hydraulics Control Lever
2- Cutting Height Control
72
MOWER DECK
PRIMOHT20NC_0063
PRIMOHT20NC_0064
PRIMOHT20NC_0065