Warning Symbols - Zetor PRIMO HT 20 NC Operator's Manual

Warning Symbols

Safety labels are placed on the tractor to work safely with the machine.

Do not forget to read them and follow the instructions.

Keep safety labels clean and undamaged at all times.

If the safety label on the machine is dirty, wash it with soapy water and wipe with a soft cloth. Never
use a solution such as thinner or acetone, as these may erase inscriptions or images.
When washing with a high-pressure water stream, detachment may occur.

Do not use a direct stream of high-pressure water to clean the labels.
If the safety label is damaged or lost, order a new one immediately and place it on the machine.

When attaching the new label, clean the place with water, so that the label can be properly attached,
and wait for the surface to dry. Then attach the label.
Each label has an order number at the bottom.
When replacing the part on which the label is located, place a new label on the new part.

32
GENERAL INFORMATIONS