Control Pedals; Travel Speed; Parking Brake Pedal - Zetor PRIMO HT 20 NC Operator's Manual

Control Pedals

Travel Speed

1- Travel Speed Control Pedal (Forward)
2- Travel Speed Control Pedal (Reverse)
When the forward travel speed control pedal is pressed, the forward direction is selected. The reverse
direction is selected by pressing the reverse speed control pedal. When the speed control pedal is released,
neutral is shifted and the tractor stops.
Warning:
When the direction of travel (forward / reverse) is engaged while driving, a shock may occur

due to inertia, which may cause injury. Therefore, change direction only if the tractor is
stopped.
Only change direction if you are sitting in the operator's seat.


Parking Brake Pedal

1 - Parking Brake Pedal
1. To engage the parking brake, first depress the brake pedals and depress the parking brake pedal. At
this point, first release the brake pedal and then lock the parking brake pedal.
2. To release the parking brake, depress the brake pedals again.
NOTE
If you have the parking brake partially applied while driving, the brake disc will wear

prematurely.
48
TRACTOR CONTROLS
PRIMOHT20NC_0033
PRIMOHT20NC_0034