Rear Link; Front Link - Zetor PRIMO HT 20 NC Operator's Manual

1- Rear Link

2- L Pin
1. Set the cutting height adjustment control to zero inches.
2. Move the hydraulic control lever forward to lower the rear link.
Use the L pins to connect the rear link to the mower deck.

Front Link

1- (L)
2 - Front Link
1- Front Bracket Groove
1. Hook the front link by the groove of the front bracket as shown in the figure.
NOTE
Make sure that the front link is placed in (L) position in the first or second hole.
MOWER DECK
PRIMOHT20NC_0066
PRIMOHT20NC_0067
PRIMOHT20NC_0068
73