Table of Contents
Advertisement
C
Getting started
Minimum PC requirements
Software installation guidelines
Install GelCapture Software
Windows
™
XP professional
‑ Gel
E
™
Imager Gel Documentation System User Guide
In order to install and operate both the E‑Gel
PC must meet the following minimum requirements:
™
™
• Intel
Core
2 Duo processor, 1.8 GHz.
• Minimum 1 GB RAM of memory (2 GB recommended).
™
• 32 bit Windows
XP Pro (English version, SP 3) OR Windows
(English version) operating system, or Windows 10.
• Minimum monitor resolution of 1024 × 768 pixels.
• A free USB 2.0 port (Not compatible with USB 1.0 or 1.1).
To install the GelCapture software and camera drivers, follow these guidelines:
• Log in as user with Administrator privileges (for installation only). Verify that you
are logged in as an Administrator before starting installation. If you do not have
Administrator privileges, contact your IT department for help.
• Change PC power setting to "Never Hibernate".
• Make sure that the PC is not connected to the E‑Gel
GelCapture software.
• Install GelCapture software before turning on the E‑Gel
camera drivers.
You do not have to have an active internet connection while performing software
installation.
1. Insert the installation CD into the disk drive, and follow the instructions provided
by the installation wizard.
2. When the self-installation has completed, click on Finish to exit setup.
Software installation
™
Imager and GelCapture software, your
™
™
7 Professional
Imager when installing the
™
Imager and installing
33
Advertisement
Table of Contents
