Table of Contents
Advertisement
Chapter 3 GelCapture software
3
Live mode screen
Live mode screen
1
Iris and focus settings: Image of recommended settings for the iris and focus.
1
Exposure time: The +/– slide gauge is used to adjust the amount of time the camera sensor collects signal to create an
2
image.
Sensitivity: The +/– slide gauge is used to adjust signal detection sensitivity.
3
Extended detection: Opens a tab with tools to adjust dynamic range. See "Perform extended detection" on page 27.
4
Brightness: The +/– slide gauge is used to adjust image brightness.
5
Area of interest: Allows tools to be used in selected regions of the image, in Live mode or for a saved image.
6
Overexposure: See "Correct overexposure" on page 28.
7
Change: Used to return to Home screen to change hardware configuration.
8
Control panel: See "Description of live mode control panel tools" on page 23.
9
Preferences: Open Preferences menu (see page 26).
10
File: Open File menu (see page 26).
11
Home: Return to Home screen.
12
22
4
2
3
12
11
10
7
5
6
‑ Gel
E
™
Imager Gel Documentation System User Guide
9
8
Advertisement
Table of Contents
