Using The E-Gel ™ Imager Gel Documentation System; Set Up The E-Gel ™ Imager - Thermo Scientific E‑Gel 4466611 User Manual

Chapter 2 Methods
2
‑ Gel
Using the E ™ Imager gel documentation system
Using the E‑Gel
Set up the E‑Gel
16
™
Imager gel documentation system
After the software and hardware for the E‑Gel
ready for use. Read the following chapter for detailed explanations on how to operate
the system. For your convenience, the system is provided with a Quick Reference
Guide that includes the operating instructions.
™ Imager
1. Ensure that the type of filter in the filter tray is appropriate for the type of stain
being used in your gel sample. If the filter does not provide the best image
possible, it may be necessary to test imaging with another type of filter (see
"Colored emission filters" on page 13 for more information).
2. Remove the E‑Gel
3. Place the gel in the center of the E‑Gel
™
™
Imager Camera Hood from the E‑Gel
™
Imager Base.
‑ Gel
E ™ Imager Gel Documentation System User Guide
Imager system is set up, the system is
™
Imager Base.