™
The E‑Gel
Imager iBase
™
Using the E‑Gel
‑ Gel
E
™
Imager Gel Documentation System User Guide
™
Light Diffuser
™
Imager iBase
Light Diffuser
™
The E‑Gel
Imager iBase
images that are obtained from the E‑Gel
Imager Blue Light Base or E‑Gel
The diffuser has a thin protective film on one side, and 2 strips of adhesive-backed
velcro on the other side.
1
1
™
Velcro strip for E‑Gel
1
Velcro strip on E‑Gel
™
2
™
™
E‑Gel
Imager iBase
3
™
Attach the E‑Gel
Imager iBase
1. Remove the velcro strips from the diffuser, then peel off the brown adhesive
backing.
2. Attach the velcro strips to the back of the E‑Gel
firmly to set the strips in place.
Note: Do not remove the velcro strips once they are attached to the E‑Gel
™
iBase
Device.
Appendix H Products no longer supported
™
Light Diffuser (Cat. No. 4473062) is designed to improve
™
iBase
™
™
Safe Imager
™
iBase
Device
Imager iBase
™
Light Diffuser
Light Diffuser
™
Light Diffuser
‑ Gel
The E
™
Imager iBase
™
Light Diffuser
™
Device when placed on the E‑Gel
Transilluminator.
2
3
2
™
™
iBase
Device, then press
H
™
™
61