Invert An Image; Apply Pseudo Colors - Thermo Scientific E‑Gel 4466611 User Manual

Invert an image

Apply pseudo colors

‑ Gel
E ™ Imager Gel Documentation System User Guide
Inverting an image is particularly useful for discriminating between close bands. This
function inverts the color scale of the image (i.e., light areas appear dark and dark
areas appear light, much like for a film negative).
1. Click Invert (
) on the control panel.
An inverted version of the image is displayed.
2. Click Invert (
) again to revert the image to its original state.
Pseudo color applies a false color palette to the image by applying a color
spectrum, designating "hot" and "cold" regions of the image. Colors are based on
gray scale intensity, where red corresponds to the maximum (hot) and blue
corresponds to the minimum (cold) gray scale levels.
1. Click Pseudo colors (
An image of the gel with false color is displayed.
2. Click Pseudo Ccolors (
Chapter 3 GelCapture software
) on the control panel.
) again to revert the image to its original state.
3
Invert an image
29