Observation
Improper illumination intensity
Duration of E‑Gel
™
Safe Imager
transillumination too short
‑ Gel
E
™
Imager Gel Documentation System User Guide
Possible cause
Button is receiving incorrect
voltage
Low incoming illumination
source voltage
™
™
™
E‑Gel
Safe Imager
transilluminator switched on with
short press (30 second
transillumination)
Appendix A Troubleshooting
Apply pseudo colors
Recommended action
Contact technical support.
Contact technical support.
Press the button on the E‑Gel
2 seconds. The transilluminator turns on for
5 minutes before automatic shutoff.
A
™
™
Safe Imager
for
31