Thermo Scientific E‑Gel 4466611 User Manual page 60

Appendix H Products no longer supported
H
‑ Gel
Using the E ™ Imager Adaptor Base
60
™
Connect the E‑Gel
Adaptor Base
1. Connect the DC connector cable to the E‑Gel
™
iBase Device.
2. Connect the E‑Gel ™
Base.
3. Place the E‑Gel
™
Safe Imager
4. Connect the iBase
™
the rear of the E‑Gel
5. The E‑Gel ™ ™
iBase
6. Press the ON/OFF power button to power on the E‑Gel
1
E‑Gel ™ Safe Imager
1
™
iBase /Safe Imager
™
Safe Imager power cable into the E‑Gel
™
into the well of the E‑Gel
™
/Safe Imager power supply cable to the 48-V power port at
™
Imager Adaptor Base.
Device is now ready for use with the E‑Gel
™ ON button
‑ Gel
E ™ Imager Gel Documentation System User Guide
™
Transilluminator with the
™ ™
Safe Imager and the E‑Gel
™
Imager Adaptor
™
Imager Adaptor Base.
™
Imager System.
™
Safe Imager
™
™
.