Appendix D The E‑Gel
D
‑ Gel
™
Using the E
Imager Band Excision Kit
Excise a band from the gel
44
™
Imager Band Excision Kit
1. Turn the E‑Gel
™
Imager camera OFF, then remove the E‑Gel
Hood and anything on the surface of the E‑Gel
2. Place the Cutting Gel Guard on the surface of the E‑Gel
3. Place the magnetic activation switch on top of the sensor, and power on the
™
E‑Gel
Imager Light Base.
4. Use a clean knife or scalpel to cut bands from the gel.
5. After cutting the bands, remove the magnet, then transfer the excised bands
from the plate to the light base.
6. Place the camera hood back on top of the light base.
7. Press the camera ON/OFF button to view the gel bands.
™
Imager Light Base.
™
‑ Gel
E
™
Imager Gel Documentation System User Guide
™
Imager Camera
Imager Light Base.