Install the E‑Gel
™
‑ Gel
E
™
Imager Gel Documentation System User Guide
Imager Camera Hood and Light Base
1. Place the E‑Gel
™
Imager Light Base on a flat surface.
2. Plug the Universal 12 V power cord into the light base power port, and connect
the wall plug to an electrical socket.
3. Plug the USB 2.0 cable into the camera USB port of the camera hood and
connect the other end into the USB 2.0 port of your computer.
™
E‑Gel
Imager Light Base
1
Universal 12 V power cord
2
Electrical socket
3
E‑Gel
™
Imager Camera Hood
4
USB 2.0 cable
5
Computer
6
5
6
1
Chapter 2 Methods
2
Install hardware
4
2
3
15