Installation Guide Linear Motors
Bearing kit
6.2.1 General information
For fast, uncomplicated maintenance, these types of motors are equipped with replaceable slider bearings.
The integrated sliding bearings are east to replace in a few manual steps.
Item
PB10-70x160-SSC-D
PB10-70x240-SSC-D
PB10-70x320-SSC-D
6.2.2 Mounting
Page 20 / 32
Description
Bearing kit for PS10-70x160-SSC (dry bearing)
Bearing kit for PS10-70x240-SSC (dry bearing)
Bearing kit for PS10-70x320-SSC (dry bearing)
P10-70-SSC / P10-70-SSC-D02
Remove the slider.
Pull the slider completely out of the stator.
Large magnetic attraction forces
(Observe warning notice from page 5)!
If necessary, cover obvious iron constructions
with non-magnetic material (e.g. wood).
Dismantle the front mounting flange.
Loosen screws and remove flange.
Dismantle rear mounting flange.
Loosen screws and remove flange.
ENG
Item-No.
0150-3853
0150-3854
0150-3855
NTI AG / LinMot