Description; Introduction - Teldat H1 RAIL Series Installation Manual

1 Description

Chapter 1 Description

1.1 Introduction

The Teldat H1 RAIL router is an IP router conceived to work in hostile and extreme environments and designed to
be installed in rolling stock. Thanks to its ruggedized mechanics and special characteristics, allowing it to bear ex-
treme temperatures, this router is particularly suited for: rolling stock, automotive applications, industrial environ-
ments, industrial telecontrol, distribution installations for electricity, gas, water, etc.
Moreover, it enables the access to data networks through cellular or mobile telephony technologies. Thanks to its
modular design, this device can quickly adapt to the latest technologies.
The Teldat H1 RAIL family is, therefore,compatible with GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA, HSPA+,
LTE, CDMA 2000 1xRTT, CDMA Ev-Do, etc.
The router can incorporate one or two cellular technology modules, thus permitting simultaneous connections to dif-
ferent carrier networks (to permanently increase its capacity, or to use them as backup when one of the networks is
unavailable).
In addition, the latest technology in internal GPS (SiRF® Start IV) can be incorporated for positioning tasks in on-
board environments.
The Teldat H1 RAIL family includes an integrated four-port Ethernet LAN Switch for local area networks.
Optionally, the Teldat H1 RAIL may incorporate a Wireless LAN MINI-PCI module.
This manual will show you how to install and connect these devices.
Teldat H1 Rail: External aspect
Fig. 1:
Note
SIRF, SIRF Start and the SIRF logo are SIRF Technology, Inc. (a CSR plc company) trademarks.
Other products, services and names used in this document may have been registered by their respect-
ive proprietors.
2
Teldat S.A.
Teldat H1 RAIL