I - 1. Introduction; I - 1.1. Device Description - Teldat ATLAS 160 Installation Manual

I - 1. Introduction

ATLAS X60
The
hardware and designed with network convergence in mind as it supports IP
Telephony and the possibility to encode video.
Teldat proposes the
network, with wireless access point functionality, as well as for the wide area
network as this device supports the following interface cards: GSM, GPRS,
EDGE, UMTS, HSDPA, CDMA2000, EV-DO and WiMAX.
ATLAS X60
The
in all the Teldat switch-router families. This is characterized by the enormous
variety of supported functionalities and specially aimed at satisfying access needs
to corporate data networks. The capacity of the Teldat Internetworking Code for
remotely managing devices, the possibility of implementing Quality of Service
mechanisms (QoS), security mechanisms and the ability to create Virtual Private
Networks through IPSec or L2TP, together with the wide range of protocols and
IP routing and bridging functionalities make this an outstanding feature.
ATLAS X60
The
allow you to increase the number of interfaces in the device.
This manual will show you how to install and connect these devices.

I - 1.1. Device description

Installing the Router
routers are modular devices incorporating encryption
ATLAS X60
for wireless technology, both for the local
executes the "Teldat Internetworking Code" (CIT) which runs
router family can be expanded with up to 4 PCI cards which
ATLAS 160 and 260 Router
ATLAS X60
Installation
I-1
I - Chapter.
Doc. Dm695-I
Rev. 1.0