Mount The Center Rack Sensor - Raven AutoBoom Installation Manual

Boom Sensor Mounting Location
FIGURE 9.
Single
Sensor
Mounting
Location
Place two 2-9/16" W x 3" L x 3/8" thread U-bolts (P/N 107-0171-614) on the front rail of the left boom.
1.
Mount the left sensor (P/N 063-0130-014) on the installed U-bolts.
2.
Secure the sensor to the boom by installing four 3/8" zinc flanged lock nuts (P/N 312-1001-164) to the ends
3.
of the U-bolts.
Tighten the nuts to ensure the sensor is mounted securely.
4.
Repeat these steps to mount the remaining boom sensor(s).
5.

Mount the Center Rack Sensor

Center Sensor Mounted to Bracket
FIGURE 10.
Secure the center sensor (P/N 063-0130-018) to the ultrasonic sensor boom mount weldment (P/N 116-
1.
0159-684) using four 3/8"-16 UNC x 1-1/4" hex bolts (P/N 311-0054-106) and four 3/8"-16 zinc flanged lock
nuts (P/N 312-1001-164).
Manual No. 016-023-071
UltraGlide
Dual Sensor
Mounting
Location
(Optional)
51