Install The Powerglide Hydraulic System - Raven AutoBoom Installation Manual

Chapter 3
PowerGlide Wiring Kit (P/N 117-0137-022)
TABLE 3.
Picture

Install the PowerGlide Hydraulic System

8 Flexi-Coil 2007 68 Series, CaseIH SRX Series, & New Holland 216 - 120'-134' Booms
Item Description
Cable - AutoBoom Controller
Cable - AutoBoom Valve Harness
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Part Number
115-0230-002
115-0230-003
WARNING
CAUTION
NOTICE
Qty.
1
1