Configuring Remote Management On The Scopia Xt Series - RADVision SCOPIA XT5000 Series Administrator's Manual

Configuring Remote Management on the SCOPIA XT Series

Remote management on your SCOPIA XT Series is enabled by default. You can configure the
SCOPIA XT Series so that it can be remotely manager from any computer or from a specific
computer only.
The default credentials for remote access are:
We strongly recommend that you change the default credentials first time you access the
SCOPIA XT Series remotely.
Specific operational information on how to configure and manage your SCOPIA XT Series
remotely is provided in relevant sections.
Before you begin
To configure the network, contact your network administrator.
Procedure
Step 1
Step 2
Step 3
RADVISION | Administrator Guide for SCOPIA XT5000 Series Version 3.0
•
username - Admin
•
password - 1234
Access the SCOPIA XT Series web interface.
In the Administrator Settings tab, select Utilities > Remote Access > Web.
Figure 2-2 Configuring remote management on SCOPIA XT Series
Set the fields as described in Table 2-2 on page 13.
Maintenance Tasks | 12