Resolving Problems With Pc Presentations; Resolving Xt Remote Control Unit Problems; Restoring Default User Settings - RADVision Scopia XT4000 Series User Manual

Resolving Problems with PC Presentations

Problem
Solution
Solution

Resolving XT Remote Control Unit Problems

Problem
Solution
Solution
Solution

Restoring Default User Settings

This procedure explains how to restore the default settings if necessary, from the endpoint
itself.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Option
Bottom
Right
4.
From the web interface only, select Save.
I cannot send a presentation from my PC.
Make sure the VGA/DVI cable is properly connected between the PC and the XT Codec Unit,
as described in "Connecting a Computer to the Scopia XT Series" on page
Make sure the resolution of the PC output is supported by the XT Codec Unit (see
the Computer Display Resolution").
The XT Remote Control Unit does not function.
Replace the battery, as described in Scopia XT Series Installation Guide. When the XT
Remote Control Unit's battery power is low, an icon appears in the system menus letting you
know that you should replace the battery:
•
Half-charged Battery
•
Low Battery
If the battery power is not low, configure the XT Remote Control Unit code on the XT Codec
Unit to the same number that it is set on the XT Remote Control Unit, as described in
"Pairing an XT Remote Control Unit with a XT Codec Unit" on page
If you still experience problems, reconfigure the XT Remote Control Unit code to be a number
between 01-04, inclusive.
Description
"Adjusting the Image Position" on page
20.
15).
Troubleshooting the Scopia XT Series | 70
46.
"Selecting