Table of Contents
Advertisement
Restoring Default User Settings
About this task
This procedure explains how to restore the default settings if necessary. You can do this from the
endpoint itself only.
You can perform this procedure with your XT Remote Control Unit as described below, or using your
keyboard and mouse (for more information, see
XT Executive
Before you begin
• Turn on the Scopia XT Series unit.
• Verify that you have the four-digit PIN code required to make changes to the system settings. The
default PIN code is 1234.
Procedure
1. From the endpoint's main menu, select Configure > General.
2. Set Show Advanced Settings to Yes.
3. Press the
4. Select Advanced.
User Guide for Scopia XT Executive Version 3.2
on page 24).
Figure 78: Enabling advanced settings
Back key on the XT Remote Control Unit.
Using the Keyboard and Mouse to Control the Scopia
Troubleshooting the Scopia XT Series | 101
Advertisement
Table of Contents
