Cisco 7800 Series Administration Manual page 315

Cisco IP Phone Troubleshooting
Parameter
Customizable PLK Options
BLF List
BXfer to Starcode Enable
Description
Features that users are allowed to configure on line
keys.
To allow a feature, add the corresponding option as
shown below. Separate options with the semi-colon
(;).
• Speed dial:
• Busy Lamp Field (BLF) key to monitor a user:
blf
• Call pickup from a monitored line:
Note
Default:
Note
Example, to allow all features:
sd;blf;cp
Example XML configuration:
<Customizable_PLK_options
ua="na">sd;</Customizable_PLK_options>
Activates or deactivates monitoring of the BLF list.
When set to Show, the phone assigns available line
keys in sequence, to monitor the BLF list entries. The
labels of the BLF list keys show the names of the
monitored users and the status of the monitored lines.
This setting only has significance when BLF List
URI is configured.
Example XML configuration:
<BLF_List ua="rw">Show</BLF_List>
When set to Yes, the phone performs a blind transfer
when the *code is defined in a speed dial extended
function,. If set to No, the current call is held and a
new call is started to the speed dial destination.
Default: No
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
sd
This option is only effective when the
option is added.
blf
sd;
Adding the option automatically allows
sd
users to configure speed dial to a monitored
line (speed dial with BLF) when the
option is added.
General
cp
blf
301