Cisco 7800 Series Administration Manual page 291

Cisco IP Phone Troubleshooting
Programmable Softkeys
Parameter
Programmable Softkey Enable
Idle Key List
Missed Call Key List
Off Hook Key List
Dialing Input Key List
Progressing Key List
Connected Key List
Start-Xfer Key List
Start-Conf Key List
Conferencing Key List
Releasing Key List
Hold Key List
Ringing Key List
Shared Active Key List
Shared Held Key List
PSK 1 through PSK 16
Description
Enables programmable softkeys.
Softkeys that display when the phone is idle.
Softkeys that display when there is a missed call.
Softkeys that display when the phone is off-hook.
Softkeys that display when the user must enter dialing
data.
Softkeys that display when a call is attempting to
connect.
Softkeys that display when a call is connected.
Softkeys that display when a call transfer has been
initiated.
Softkeys that display when a conference call has been
initiated.
Softkeys that display when a conference call is in
progress.
Softkeys that display when a call is released.
Softkeys that display when one or more calls are on
hold.
Softkeys that display when a call is incoming.
To silence an incoming call, you can add Ignore
softkey.
Softkeys that display when a call is active on a shared
line.
Softkeys that display when a call is on hold on a
shared line.
Programmable softkey fields. Enter a string in these
fields to configure softkeys that display on the phone
screen. You can create softkeys for speed dials to
numbers or extensions, vertical service activation
codes (* codes), or XML scripts.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Programmable Softkeys
277