Cisco 7800 Series Administration Manual page 117

Hardware and Accessory Installation
Figure 15: Phone Bracket Attachment
1
Step 3 Attach the cables to the phone:
a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack.
b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to
the 10/100/1000 Computer (PC access) port.
c) (Optional) If you use an external power supply, plug the power cord into the phone. Dress the cord by
clipping it into the clips that are incorporated into the phone body next to the PC port.
d) (Optional) If the cables terminate inside the wall bracket, connect the cables to the jacks.
Screw holes
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Install the Non-Lockable Wall Mount Kit
2 Slots for mounting tabs
103