Cisco 7800 Series Administration Manual page 281

Cisco IP Phone Troubleshooting
Parameter
Short Name
Share Call Appearance
Extended Function
Miscellaneous Line Key Settings
Parameter
Line ID Mapping
SCA Barge-In Enable
SCA Sticky Auto Line Seize
Call Appearances Per Line
Supplementary Services
Parameter
Conference Serv
Description
Specifies the user name for Line Key.
Default: $USER
Specifies whether the incoming call appearance is
shared with other phones or it is private.
Use to assign any of the following features or
functions to unused line keys on the phone:
• Busy Lamp Field
• Call Pickup
• Speed Dial
Description
Specifies the shared call appearance line ID mapping.
If Vertical First is set, the second call makes the next
available line ID LED flash. If Horizontal first is set,
the second call will make the same LED flash on
which the first call is received. Also, the behavior is
same for both outgoing and incoming calls.
Note
Default: Horizontal First
Enables the SCA Barge-In.
Default: No
If enabled, restricts to automatically pick up an
incoming call on a shared line when you take the
phone off-hook.
This parameter allows you to choose the number of
calls per line button. You can choose a value from 2
to 10.
Default: 2
Description
Enable or disable three-way conference service.
Default: Yes
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Miscellaneous Line Key Settings
7811 Cisco IP Phone does not support Line
ID Mapping.
267