Cisco 7800 Series Administration Manual page 118

Install the Non-Lockable Wall Mount Kit
Figure 16: Cable Attachment
1
2
3
Step 4 Attach the phone to the wall bracket by inserting the tabs on the top of the wall bracket into the slots on the
phone bracket.
For cables that terminate outside of the brackets, use the cable-access openings in the bottom of the bracket
to position the power cord and any other cable that does not terminate in the wall behind the bracket. The
phone and wall bracket openings together form circular openings with room for one cable per opening.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
104
Phone Bracket
Network Port
Wall Bracket
Hardware and Accessory Installation
4 Handset Port
5 AC Adapter Port
6 Optional Power Cable