Cisco 7800 Series Administration Manual page 284

XSI Phone Service
Parameter
Preferred Password Input Mode
XSI Phone Service
Parameter
XSI Host Server
XSI Authentication Type
Login User ID
Login Password
SIP Auth ID
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
270
Cisco IP Phone Troubleshooting
Description
Options to specify the password input method of
extension mobility PIN. Options are: Alpha-numeric
and Numeric.
Default: Alphanumeric
Description
Enter the name of the server; for example,
xsi.iop1.broadworks.net.
Note XSI Host Server uses http protocol by
default. To enable XSI over HTTPS, you
can specify
https://
Default: Blank
Determines the XSI authentication type. Select Login
Credentials to authenticate access with XSI id and
password. Select SIP Credentials to authenticate
access with the register user ID and password of the
SIP account registered on the phone.
Default: Login Credentials
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
Enter SIP Auth ID when you select Login Credentials
or SIP Credentials for XSI authentication type.
When you choose SIP Auth ID as SIP Credentials,
you must enter Login User ID. Without Login User
ID, the BroadSoft directory will not appear under the
phone Directory list.
Default: Blank
Alphanumeric password associated with the User ID.
Enter login password, when you select Login
Credentials for XSI authentication type.
Default: Blank
The registered user ID of the SIP account registered
on the phone.
Enter SIP Auth ID when you select SIP Credentials
for XSI authentication type.
in the server.