Cisco 7800 Series Administration Manual page 267

Cisco IP Phone Troubleshooting
Parameter
Log Upgrade Request Msg
Log Upgrade Success Msg
Log Upgrade Failure Msg
Peer Firmware Sharing
Peer Firmware Sharing Log Server
For more information about the Provisioning page, see the Cisco IP Phone 7800 Series Multiplatform Phones
Provisioning Guide.
CA Settings
Parameter
Custom CA Rule
HTTP Settings
Parameter
HTTP User Agent Name
Description
Syslog message issued at the start of a firmware
upgrade attempt.
Default: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a firmware upgrade
attempt completes successfully.
Default: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Syslog message issued after a failed firmware upgrade
attempt.
Default: $PN $MAC -- Upgrade failed: $ERR
Enables or disables the Peer Firmware Sharing feature.
Select Yes or No to enable or to disable the feature.
Default: Yes
Indicates the IP address and the port to which the UDP
message is sent.
For example: 10.98.76.123:514 where, 10.98.76.123
is the IP address and 514 is the port number.
Description
The URL to download Custom CA.
Default: Blank
Description
Allows you to enter a name for HTTP user.
Default: Blank
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
CA Settings
253