Cleaning The Display; North American Emissions Compliance - Johnson Controls FMS-2000C Installation Manual

FMS-2000C

Cleaning the display

IMPORTANT:
• Do not apply cleaner directly to the touch panel surface. If cleaner spills onto the touch panel, soak up the cleaner immediately
with an absorbent cloth.
• Do not use cleaner that is either acid or alkali. Use neutral pH cleaner.
• Do not use organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alchohol, or kerosene.
IMPORTANT :
• N'appliquez pas de nettoyant directement sur la surface du panneau tactile. Si du nettoyant pénètre dans le panneau tactile,
essuyez immédiatement le nettoyant à l'aide d'un chiffon absorbant.
• N'utilisez aucun nettoyant qui est acide ou alcalin. Utilisez un nettoyant dont le pH est neutre.
• N'utilisez pas de produits chimiques organiques comme le diluant pour peinture, l'acétone, le toluène, le xylène, l'alcool
propylique ou isopropylique, ou le kérosène.
To clean the display, complete the following steps:
1. Use a dry or lightly dampened cloth with a mild cleaner or ethanol.
2. Make sure the cloth is only lightly dampened, not wet.
3. Wipe the surface gently. If there is a directional surface texture, wipe in the same direction as the texture.

North American Emissions Compliance

United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case users will be required to
correct the interference at their own expense.
Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Product warranty
This product is covered by a limited warranty, details of which can be found at
www.johnsoncontrols.com/buildingswarranty.
Software terms
Use of the software that is in (or constitutes) this product, or access to the cloud, or hosted services applicable to this product, if any, is subject to
applicable terms set forth at www.johnsoncontrols.com/techterms. Your use of this product constitutes an agreement to such terms.
Patents
Patents: https://jcipat.com
Single point of contact
APAC
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 32 CHANGJIJANG RD NEW DISTRICT
WUXI JIANGSU PROVINCE 214028 - CHINA
Contact information
Contact your local branch office: www.johnsoncontrols.com/locations
Contact Johnson Controls: www.johnsoncontrols.com/contact-us
Europe
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
All specifications and other information shown were current as of document revision and are subject to change without notice.
NA/SA
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
Building Technologies & Solutions
Headquarters: Milwaukee, Wisconsin, USA
Branch Offices: Principal Cities World-wide
© Copyright 2020 Johnson Controls.
www.johnsoncontrols.com