Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual page 90

Configuring the operating system
6.5 Changing HMI device settings
Requirements
You have opened the "Screensaver" dialog with the "ScreenSaver"
①
②
③
Procedure
Proceed as follows:
1. Enter the interval in minutes after which the backlighting is to be reduced.
Entering "0" will deactivate the backlighting reduction.
2. Enter the number of minutes before the screen saver is to be activated.
The minimum time is 5 minutes and the maximum time is 71582 minutes.
Entering "0" disables the screen saver.
3. Select either the standard screen saver or an empty screen.
– In order to select the standard screen saver, activate the "Standard" option.
– In order to select an empty screen as screen saver, activate the "Blank Screen"
4. Confirm your entries.
The dialog closes.
Result
The screen saver and the reduced backlighting for the HMI device is set.
90
Time interval in minutes until backlighting is reduced
Period of time in minutes before the screen saver is activated
Screen saver setting
option.
icon.
Operating Instructions, 10/2015, A5E36824256-AA
Mobile Panel 277 RO