Page 1
The POL903.00/100 and this Data Sheet are intended for original equipment manufacturers (OEMs) using the POL903.00/100 in or on their products. The POL903.00/100 can be used with all Siemens controllers that have a compatible USB interface. The following Siemens controllers with a compatible USB interface are available:...
Page 2
To ensure safe and reliable operation of the unit, the following points must also be observed: Avoid condensation and damp environments. If such conditions do occur, ensure that the POL903.00/100 is completely dry before reconnecting the power supply. Electrostatic charges must be avoided since they can damage the electronic components of the POL903.00/100 on contact...
Page 3
Part 1: Safety requirements The edition of the standards that applies in each case can be found in the declaration of conformity. EAC Conformity (Eurasian Conformity) ISO 9001:2015 ISO 14001:2015 OHSAS 18001:2007 China RoHS Hazardous substances table: http://www.siemens.com/download?A6V10883536 3/11 Smart Infrastructure CC1N7219en 10/28/2020...
Page 4
Max. transmission power: 14.15 dBm Simplified EU Declaration of Conformity Hereby, Siemens Switzerland Ltd declares that the radio equipment type POL903.00/100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.siemens.com/download?A5W00082967A-001...
Page 5
The warranty obligations of SIEMENS are regulated in the respective contract with SIEMENS. If you modify the product or the OSS components or use them in a manner other than that specified by SIEMENS, the warranty is excluded and no technical support is provided.
Page 6
Degree of pollution WLAN modes IEEE802.11g and b Mounting position Optional Dimensions (L x W x H) 67.5 mm x 22 mm x 10 mm Cable length between POL903.00/100 Max. 2.5 m WLAN stick and controller Weight 10 g Environmental Storage...
Page 7
Password for the terminal unit: SIBPAdmin DNS name: siemens.wlanstick Siemens AG recommends changing the password as part of the commissioning process. Changes to all settings can be made via the web interface as required. Connecting with the web interface for configuration The IP address is issued automatically via DHCP.
Page 8
Settings Settings menu item The settings for the WLAN stick can be made under Settings. The overview page displays the current settings. Individual settings can be changed by clicking on the pencil (edit) icon. The settings for the WLAN network are made in the Access Point tab: ...
Page 9
Firmware update Update menu item The WLAN stick firmware is updated under Update. The following options for updating the WLAN stick are available: Use the mouse to drag the firmware file directly from your PC into the Browse files or Drag&Drop it here field ...
Page 10
Note! Cable length between POL903.00/100 WLAN stick and controller! If the POL903.00/100 WLAN stick is not connected to the controller by a cable rather than being inserted directly, the cable must be shielded and no longer than 2.5 meters.
Page 11
Dimensions Dimensions in mm POL903.00/100 2020 Siemens Switzerland Ltd., Theilerstrasse 1a, 6300 Zug, Switzerland Subject to change! 11/11 Smart Infrastructure CC1N7219en 10/28/2020...