Using Memory Cards - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

5.1.4

Using memory cards

Requirements
The terminal compartment of the Mobile Panel 277 RO is open.
①
②
③
Procedure for inserting a memory card
Proceed as follows:
1. Remove the Velcro strip.
2. Insert the memory card into the slot.
Pay attention to the memory card symbol when inserting the memory card. An arrow on
the memory card indicates the front side and the direction of insertion. When the memory
card is correctly inserted into the slot, it stands approx. 3mm proud of the slot.
3. Close the Velcro strip.
Procedure for unplugging a memory card
Proceed as follows:
1. Remove the Velcro strip.
2. Pull the memory card out of the slot.
3. Deposit the memory card in a safe place.
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
5.1 Operator controls and displays on the Mobile Panel 277 RO
Slot
Memory card symbol
Velcro strip for fastening the memory card
Operator controls and displays
67