Setting The Character Repeat Rate Of The Screen Keyboard - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Configuring the operating system
6.3 Changing settings for operation
Procedure
Proceed as follows:
1. Press the "Open Input Panel" button to display the screen keyboard.
2. By pressing the
screen keyboard.
3. Set the position of the screen keyboard by moving the screen keyboard on the screen.
4. Store the settings by pressing the "Save" button.
5. Close the screen keyboard by pressing the "Close Input Panel" button.
6. Close the dialog.
Result
The screen keyboard settings have been modified.
6.3.2

Setting the character repeat rate of the screen keyboard

Introduction
You can set the character repeat for the screen keyboard in the Control Panel.
Requirements
You have opened the "Keyboard Properties" dialog with the "Keyboard"
①
②
③
④
80
button, you can switch between the numerical and alphanumerical
Check box for activating the character repeat
Slider control and buttons for the delay time before character repeat
Slider control and buttons for the rate of the character repeat
Test field
Operating Instructions, 10/2015, A5E36824256-AA
icon.
Mobile Panel 277 RO