Download Print this page
Siemens PMI-2 Installation Instructions Manual
Siemens PMI-2 Installation Instructions Manual

Siemens PMI-2 Installation Instructions Manual

Person-machine interface

Advertisement

Quick Links

Installation Instructions

Models PMI-2
Person-Machine Interface
INTRODUCTION
ALARM SUPERVISORY SECURITY
POWER
AUDIBLES
ON
SILENCED
PARTIAL SYSTEM
DISABLED
CPU FAIL
Figure 1
PMI-2 User Interface
PRE-INSTALLATION
P/N 315-050636-1
The Model PMI-2 from Siemens Industry, Inc., is the user interface for the FireFinder-
XLS™ system. From the PMI-2 the operator can acknowledge events, control the
system notification appliance circuits and reset the system. Detailed information
about the nature and location of events can also be displayed.
The PMI-2 is used as the primary user interface in CAB1, CAB2 or CAB3
enclosures. The PMI-2 can also be used as a primary user interface in a
remote REMBOX2 or REMBOX4 enclosure.
The PMI-2 contains the site specific program as developed in Zeus. All
TROUBLE
system logic and supervision is provided by the controller in the PMI-2.
The PMI-2 contains a full VGA LCD, Touch Screen and LEDs for display-
ing system status. An audible sounds when there are unacknowledged
MENU
events on the PMI-2. The display is surrounded by keys that are used to
More
Info +
control the displayed information and to navigate through these
ESC
screens. Keys are also provided to obtain help and to enter into the
?
menu features of the PMI-2. (Refer to Figure 1.)
On the back of the PMI-2 there are additional diagnostic displays to aid
in system troubleshooting. This is also where the PMI-2 address is set
and where the connection is made to Zeus for programming. (Refer to
Figure 2.)
For systems configured to provide Smoke Control (UUKL), refer to the
FireFinder XLS Control Panel System Manual, P/N 315-034853.
Additional labels are available for applications that require French (Canadian), Spanish,
or Portuguese (Brazilian) languages. These labels need to be ordered separately.
Refer to the table below for ordering information.
To apply labels, remove the backing from the labels and apply them to the PMI-2.
(Refer to Figure 3.)
Siemens
Siemens
Siemens Industry
Industry
Industry, , , , , Inc.
Siemens
Siemens
Industry
Building
Building
Building
Building
Building T T T T T ec
ec
ec
echnologies Di
ec
hnologies Division
hnologies Di
hnologies Di
hnologies Di
Industry
Inc.
Inc.
Inc.
Inc.
vision
vision
vision
vision

Advertisement

loading

Summary of Contents for Siemens PMI-2

  • Page 1: Installation Instructions

    Additional labels are available for applications that require French (Canadian), Spanish, or Portuguese (Brazilian) languages. These labels need to be ordered separately. Refer to the table below for ordering information. To apply labels, remove the backing from the labels and apply them to the PMI-2. (Refer to Figure 3.) Siemens...
  • Page 2 LABEL HERE ALARM SUPERVISORY SECURITY TROUBLE FOR ALTERNATE POWER MENU LANGUAGES, AUDIBLES APPLY More SILENCED Info + APPROPRIATE PARTIAL SYSTEM LABEL HERE DISABLED CPU FAIL Figure 3 Applying PMI-2 Labels for Alternate Languages Siemens Industry, Inc. P/N 315-050636-1 Building Technologies Division...
  • Page 3: Installation

    (S2, S3) located on the back of the PMI-2. For a standalone HNET panel, set the address of the PMI-2 to 01. Be sure to set leading zeros. In the Zeus Physical View, make sure that the PMI-2 is configured at address 253.
  • Page 4: Operation

    OPERATION In the normal standby condition the PMI-2 displays the site specific custom message, the time and date, and a synopsis of the system status. When an event occurs in the system, the display enters the Alert mode. The event is displayed, the local audible sounds and the appropriate LED blinks.
  • Page 5 TO UPGRADE FROM Follow the procedure below to upgrade an XLS panel from a PMI to a PMI-2. PMI TO PMI-2 Please ensure you are using Zeus 8.1.0 or greater. Create a new project in Zeus (File>New) to avoid overwriting a current project.
  • Page 6: Electrical Ratings

    When you click OK at the transfer complete message, the control panel will reset itself with the new configuration. ELECTRICAL RATINGS Siemens Industry, Inc. Siemens Canada Limited P/N 315-050636-1 Building Technologies Division...