Transport And Storage Conditions - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

2.10

Transport and storage conditions

Mechanical and climatic transport and storage conditions
The transport and storage conditions of this HMI device exceed requirements in accordance
with IEC 61131-2. The following specifications apply to the transport and storage of an HMI
device in its original packaging.
The climatic conditions comply with the following standards:
● IEC 60721-3-3, Class 3K7 for storage
● IEC 60721-3-2, Class 2K4 for transport
The mechanical conditions are compliant with IEC 60721-3-2, Class 2M2.
The following table shows the transportation and storage conditions for the HMI device.
Type of condition
Drop test (in transport package)
Temperature
Atmospheric pressure
Relative humidity
Sinusoidal vibration in accordance with
IEC 60068-2-6
Shock in accordance with IEC 60068-2-29
The following table shows the transportation and storage conditions for the terminal device.
Type of condition
Drop test (in transport package)
Temperature
Atmospheric pressure
Relative humidity
Sinusoidal vibration in accordance with
IEC 60068-2-6
Shock in accordance with IEC 60068-2-29
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
Safety instructions and general notes
2.10 Transport and storage conditions
Permitted range
≤ 1 m
From –20 to +60 °C
From 1080 hPa to 660 hPa,
corresponds to an elevation –1000 to 3,500 m
From 10 % to 90 %, without condensation
5 Hz to 8.4 Hz: 3.5 mm
8.4 to 500 Hz: 9.8 m/s
2
250 m/s , 6 ms, 1000 shocks
2
Permitted range
≤ 1 m
From –20 to +70 °C
From 1080 hPa to 660 hPa,
corresponds to an elevation –1000 to 3,500 m
From 35 % to 85 %, without condensation
5 Hz to 8.4 Hz: 3.5 mm
8.4 to 500 Hz: 9.8 m/s
2
250 m/s , 6 ms, 1000 shocks
2
31