Holding The Mobile Panel And Fixing It To The Wall - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

7. Place the impact guard
8. Fasten the impact guard to the back of the HMI device with screws.
Result
You have replaced the touch pen.
5.3

Holding the mobile panel and fixing it to the wall

Holding the Mobile Panel
The following illustrations show the correct method for holding the device on the forearm for
right- and left-handed people.
The depicted method of holding enables you, for example, to undertake movements while
servicing the monitored system.
The depicted forearm holding method enables both right and left-handed persons to use the
HMI device with equal ease. The free hand can be used to operate the operator controls on
the front side. The hand holding the HMI device can also be used to activate the enabling
button. The acknowledgment of the control input is also given if you only press one of the
enabling buttons.
The enabling button is required for the confirmation of axis movements. The enabling button
is optimally accessible. The enabling button triggers a safety shutdown in the event of a
panic reaction to danger (release or cramping).
The STOP button can also be quickly reached with your free hand.
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
5.3 Holding the mobile panel and fixing it to the wall
②
once again on the front of the HMI device.
Operator controls and displays
69