Changing The Logon Data - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

4. If a name server is used in the network, change to the "Name Server" tab.
5. Enter the respective addresses in the text boxes.
6. Confirm your entries.
The dialog closes.
7. Close the "Network&Dial-Up Connections" display.
The Control Panel is displayed again.
Result
The LAN connection parameters for the HMI device have been changed.
6.8.3

Changing the logon data

Introduction
Windows CE uses this information to gain access to the network resources. Enter the user
name, password and domain you have received from your administrator.
Requirements
You have opened the "Network ID" dialog with the "Network ID"
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
Configuring the operating system
6.8 Configuring network operation
icon.
101