Update Hmi Device Image - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Maintenance and care

9.2 Update HMI device image

9.2 Update HMI device image
The following applications are pre-installed on the HMI device:
● The Microsoft Windows CE 5.0 operating system
● The RemoteOperate Client software
The operating system and the RemoteOperate Client software are located in an image on
the "SIMATIC RemoteOperate - Applications & Documentation" CD.
When you update the operating system on the HMI device or want to reset the HMI device to
factory settings, you have the transfer the image once again to the HMI device. To do this,
connect a PC to the HMI device and then start to transfer the image using ProSave.
Requirements
● The HMI device is connected to a PC by means of the connection box and Ethernet.
● The ProSave application is installed on the PC. The ProSave software is located on the
"SIMATIC RemoteOperate - Applications & Documentation" CD.
● The ProSave add-on with the information for the HMI device is installed on the PC. The
ProSave add-on is located on the "SIMATIC RemoteOperate -
Applications & Documentation" CD.
● The data channel on the HMI device is configured.
Procedure
Proceed as follows:
1. Check that the HMI device is turned off.
2. Turn on the PC.
3. Start ProSave from the Windows Start menu on the PC.
4. Select the HMI device type in the "General" tab.
5. Select the type of connection between the HMI device and the PC.
6. Select the "OS Update" tab.
7. Select the HMI device image file "*.img" from the "Image Path" area.
8. The HMI device image file is located on the "SIMATIC RemoteOperate - Applications &
Documentation" CD. In the output area, you are provided information on the version of
the HMI device image file after it is opened.
9. Start the operating system update by means of the "Update OS" button.
10. Click on the "Transfer" button in the loader.
11. Follow the instructions in ProSave.
During the operating system update a status view opens to indicate progress. A message is
displayed when the operating system update is successfully completed.
124
Operating Instructions, 10/2015, A5E36824256-AA
Mobile Panel 277 RO