Changing Hmi Device Settings; Setting The Date And Time - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Procedure for deactivating password protection
Proceed as follows:
1. Delete the entries in the "Password" and "Confirm password" text boxes.
2. Confirm your entries.
The dialog closes.
Result
Password protection for the Control Panel and Windows CE taskbar is disabled.
6.5

Changing HMI device settings

6.5.1

Setting the date and time

Introduction
You can set the date and time on the HMI device. The HMI must be restarted in the following
cases:
● You have changed the time zone setting
● You have changed the "Daylight savings time currently in effect" check box setting
Requirements
You have opened the "Date/Time Properties" dialog with the "Date/Time Properties"
icon.
①
②
③
④
⑤
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
Time zone selection box
Input field for the time
Date selection box
"Daylight savings" check box
Button for applying changes
Configuring the operating system
6.5 Changing HMI device settings
85