Mounting and connecting
4.5 Connecting the Mobile Panel 277 RO
4.5.4
Connecting a PC
When you update the operating system on the HMI device or want to reset the HMI device to
factory settings, you have the transfer the image once again to the HMI device. To do this,
connect a PC to the HMI device and then start to transfer the image using ProSave.
Connection graphic
The figure below illustrates how you connect the HMI with a PC using the connection box
and Ethernet.
See also
Connecting the connecting cable (Page 49)
Update HMI device image (Page 124)
56
Operating Instructions, 10/2015, A5E36824256-AA
Mobile Panel 277 RO