Pto Shaft; Hydraulic Assembly; Tarpaulin Guards - SaMASZ KDD 861 Operator's Manual

4.6.

PTO shaft

Before operating learn provisions found in bar manufacturer's manual placed on the bar.

Use only PTO shafts recommended by mower's manufacturer with guards in good condition.

In order to operate safely use only fully technically fit, undamaged PTO shafts. Damaged PTO

shaft shall be repaired or replaced with new one.
4.7.

Hydraulic assembly

Caution! Hydraulic assembly is under pressure! Hydraulic oil under pressure may permeate

through skin and cause serious injury, therefore skin and eyes should be protected in particular.
In case of injuries caused by a liquid under pressure, call a doctor immediately.
Hydraulic hoses can be connected to tractor's hydraulics, provided that both the tractor's and

the mower's hydraulic assemblies are not under pressure. To remove the pressure from the
hoses just simply restart the tractor's hydraulic valves several times, once the tractor is off.
When dismounting the machine from the tractor, set the equipment aside, deflate the pressure

from hydraulics and turn tractor's engine off.
When controlling for hydraulic assembly's malfunction and looking for oil leaks, it is forbidden

to touch any potential leaks until the entire assembly is under pressure.
NOTICE: It is recommended that the hydraulic oil used should not exceed 10 oil purity

class in accordance with NAS 1638.
When using hydraulic hoses:
Avoid stretching the hoses when operating.

Do not allow hydraulic hoses to get deflected.

Do not expose hydraulic hoses to contact with any sharp edges.

If damaged or worn, replace the hoses with new ones.

Useful life for hydraulic hoses is 5 years from their production date.

4.8.

Tarpaulin guards

Due to their storing, SaMASZ manufactured mowers feature standard tarpaulin guards (1) for
self-mounting. In order to mount the guard properly put it on a mower and secure with catches (2)
and with front guard (3) (Fig. 8). Examine condition of guards and its mounting on regular basis.
Front guard (3) should be fixed so that it holds the safety curtain (1).
1
3
Operator's manual
2
Fig. 8. Mounting tarpaulin guard on mower
Double-sided disc mowers
with central suspension
- 17 -