OPERATOR'S MANUAL
Tab. 3. Location of centre of gravity
Dimension [mm]
X
Y
4.5.
Operating parts
Prior to operating the rakes check the rotor and the tine condition.
❑
Worn or damaged tines should be replaced immediately with new ones.
❑
NOTE:
When replacing working parts wear protective gloves.
4.6.
PTO shaft
Prior to operating learn instructions given by the shaft's manufacturer found on the shaft.
❑
Use only the rake's manufacturer recommended PTO shafts.
❑
In order to operate safely use only fit, undamaged telescopic articulated shafts. Damaged
❑
telescopic articulated shaft shall be repaired or replaced with new one.
Pay particular attention to PTO shaft's guards and rake's and tractor's spline shaft guards. Never
❑
work with damaged guards.
Before operation, check all guards (in tractor, machine and the shaft), if they are in place and are
❑
functional. Any worn or damaged guard must be replaced. Damaged or missing guard of drive shaft
may cause serious accident and even death.
Possible inclination of the shaft depends on shape and size of the guard. Before operation check if
❑
guards in any position are not damaged or locked.
DOUBLE-ROTOR RAKES
Fig. 4. Moving machine for transport
Y
Fig. 5. Location of centre of gravity
DUO
Machine type
DUO 680
4500
730
X
DUO 740
5200
670
13