Conveyor Integrated Drive System; Lubrication Points - SaMASZ KDD 861 Operator's Manual

Tab. 10. Oil capacities in swath rollers cog gear
Model Oil capacity [l]
Oil type
A
Fig. 51. Points of check and oil replacement in swath
rollers cog gears
7.5.

Conveyor integrated drive system

(For: KDD S/SL/W T (H))
Oil level to be controlled on the external oil level and temperature gauge A. Remove oil
filter B and top up the oil if needed. Use HYDROL PREMIUM L-HV 46 or other HLP hydraulic
oil with similar characteristic. To drain oil tank remove drain plug C, located at the bottom of oil
tank. Oil capacity is of about 33L.
Fig. 53. Location of oil level control and refilling points, on the oil tank of the conveyor drive system
7.6.

Lubrication points

Every 50 mower working hours lubricate tine/roller conditioner's bearings (Fig. 54, Fig. 55)
with LT43 grease (or other designed to lubricate rolling and slide bearings, that work in -30 to
o
+130 C) and main joints of the mower with STP grease and all connections is cylinders (Fig. 56)
with STP grease.
Operator's manual
Oil type –
for gearboxes
0.5 80W90
B
C
B
A
C
Double-sided disc mowers
with central suspension
Lubrication frequency
After first 50 h of operation, then after next 500
h (or at least once a year)
Lubrication
points
Fig. 52. Point of lubrication with ŁT43 grease for
non-locating bearing
- 58 -