3.2.3. Double-end disc mowers with swath rollers
9
10
Fig. 3c. Parts of SaMASZ double-sided mower with roller conditioner (KDD W)
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage.
Drive from tractor rpm is transmitted through PTO (9) and intersecting axis gear I (3) onto drive
shafts (6), which, through intersecting axis gears II (7) power the cutterbars (4). The cutterbars have
discs with two knives each. Moreover drive from the tractor rpm, through intersecting axis gear I
(3), PTO shafts (6), intersecting axis gears II (7) and belt transmission (13) is transmitted onto
swath rollers (14). Hydraulic lifting cylinders (2) fed from the tractor external hydraulics are used
for adjusting the mower to working position. Main frame (11), on which cutterbars (4) are installed,
is unloaded with springs (8). On main frame, safety guards (5) are mounted. The mower is equipped
with warning and signal plates (10) as standard.
3.2.4. Double-end disc mowers with swath conditioner and conveyors
9
1
3
16
Fig. 3d. Parts of SaMASZ double-sided mower with swath conditioner and conveyors (KDD S/SL T)
Operator's manual
6
8
1
3
6
9
17
4
7
Double-sided disc mowers
with central suspension
2
4
7 13
19
8
15
18
10
- 8 -
5
11
14
12
11
5
14