6.10. Conveyor control and adjustment
(For: KDD ST/SLT/WT (H))
6.10.1. Cleaning method of belt and rollers
WARNING!
Check conveyor belts condition once per hour of operating. In the event of
finding bulges caused by rolling the grass onto rollers, clean it with use of
lever and remove the grass. Using conveyors with bulged belts may lead to
their premature wearing.
Conveyor belts are not subject to warranty.
1. In order to clean roller switch lever D when rotating belt to 1 and hold until bulges disappear
(Fig. 42). This should also be performed from the other side of conveyor if necessary.
Bulges
2. Impurities inside belt are removed once conveyor is in vertical position. Belt is deflected with
hand and then impurities are removed with a hook wire.
Operator's manual
1
Fig. 42. Cleaning of conveyor rollers
Fig. 43. Removal of contaminants inside the conveyor
Double-sided disc mowers
with central suspension
D
- 53 -
1