Eco Mode - Salus FC600 Full User Manual

Fan coil thermostat

Hide thumbs Also See for FC600:

Table of Contents

3.6.3. Eco Mode

When in Eco mode, the thermostat will use Eco set point to control room temperature. When Eco mode is

activated, the Eco icon

Tap the work status icon.

Note: When thermostat operates in Eco Mode, you cannot set a new temperature set point by sliding the

cursor. After thermostat exists Eco Mode, it returns to the previous set mode.

Eco set point setting parameter is d10 for heating mode and d11 for cooling mode. The default set point

temperature is 30°C for cooling mode and 15°C for heating mode. To change that, please refer to settings in

Installer Section.

Note: If you have an occupancy sensor, then the Eco Mode will be activated automatically when the set up

is complete. This is the default d34 setting. You can choose from either Eco or STANDBY mode.

Note: If the occupancy sensor is installed, the Eco Mode via app is disabled. On the LCD, the man in door

symbol will be displayed if the occupancy sensor detects presence. When the occupancy sensor does not

detect presence, the man in door symbol disappears and the Eco Mode via app is enabled. This is the

default d34 setting. For more information regarding the installer mode, please check page 54.

Fan Coil FC600 Instructions Manual

will be displayed. To select Eco mode, follow the easy steps.

Select Eco Mode

The thermostat is running

in Eco Mode.

Table of Contents