Temperature Setpoint - Salus FC600 Full User Manual

9
M
...heating only...
Note: Steps from 8-10 (choosing heating/cooling or both) is available only for the manual heat/cool changeover.
If you choose Auto or HCCO at step 6, the thermostat will skip these settings and will enter STANDBY Mode.

2.5. Temperature Setpoint

Setpoint temperature is the temperature you want to set or the temperature set by the program. Under your
home display, press
press of the Up/Down arrows, the LCD will show the current program setpoint, with the Set icon.
For non-programmable thermostat
M
M
00:00
Press or to check
setpoint.
M
M
M
00:00
9 Fan Coil FC600 Instructions Manual
10
M
... or heating and
cooling . Confirm by
pressing OK .
M
or to view the set point temperature. When the program is running, after the short
M
The current setpoint temperature
will start flashing.
The thermostat will now return to home screen and it will follow new setpoint.
11
When the main settings are
done - FC600 will go to Standby
M
mode. Press OK
to turn ON the FC600.
M
Press or
decrease setpoint.
M
M
12
M
3 sec
Thermostat is On.
for 3 sec
M
to increase /
M
Press OK
M
M
.
M
to save and exit.