Table of Contents
Advertisement
2.8.3. Offset Function
Temperature Offset is a feature that lets you adjust the room temperature reading +/- 3.0⁰C in 0.5 ⁰C steps.
This is handy if your thermostat is located in a spot with a slightly different temperature than the overall room
temperature. You can access the offset also by pressing the Mode button.
Note: Press any button to activate the LCD first!
1
M
M
Press Mode button
for
3 seconds.
5
M
Using
or
, set an
offset range.
M
2.9. Other Functions
M
2.9.1. Frost Protection
Frost Protection is a function that prevents pipes from freezing. Auto Frost Protection is always on and it is set
to 5⁰C. In Frost Protection all outputs are Off. Frost protection is active during the Standby mode as well. If room
temperature drops below Frost Protection temperature the heating valve will open and and the fan will be
turned on at maximum speed.
Long Press
19
Fan Coil FC600 Instructions Manual
2
3 sec
Program menu will be
displayed. Press
6
M
M
M
M
M
to enter STANDBY
/ Frost Protection Mode.
3
M
Clock menu will be displayed.
.
Press
7
M
M
M
Press OK
to confirm and
exist to home screen.
3 sec
Thermostat in STANDBY / Frost
Protection Mode.
4
M
Offset menu will be displayed.
M
.
Press OK
8
M
Home screen with new offset
temperature display.
M
M
.
M
Advertisement
Table of Contents
