Salus FC600 Full User Manual page 7

1. Auto heat/cool selection
This icon is visible when the thermostat is running in auto heat/
cool changeover.
2. Schedule icon
This icon is visible when the thermostat is programmable and is
following the schedule.
3. Permanent/temporary override
This icon is visible always when the thermostat is digital (non-
programmable) or when permanent override is enabled. When
temporary override is enabled, the icon will appear next to the
schedule icon.
4. Fan icon
This icon is animating in sequence when the fan is
running.
5. Fan speed (low, medium, high, Auto, OFF)
This icon shows fan speed and status.
low medium
6. Wireless communication icon
This icon appears when the thermostat is connected
to the Universal Gateway.
7. Glob icon
This icon is appears when the thermostat is
connected to the Universal Gateway and App via
Internet.
8. Temperature unit
⁰C or F
9. Heating Mode ON
This icon indicates heating mode. Animating when
calling for heat.
10. Cooling Mode On
This icon indicates cooling mode. Animating when
calling for cooling.
11. STANDBY mode
This icon indicates the thermostat is in STANDBY
Mode or Frost Protection.
12. Occupancy/vacancy sensor
Man in door when presence detected
door when not.
13. Lock function
This icon indicates the keys of the device are locked.
7 Fan Coil FC600 Instructions Manual
OFF
high
M M M
M M M
M M M
, empty
14. AM/PM
Appears when you have 12 hours clock format.
15. Eco Mode
This icon is visible when the thermostat runs in Eco Mode.
16. Current day of the program
The current day of the program is underlined.
17. Clear filter reminder
This icon is visible when the filters have to be replaced.
18. Current time
Time Display.
19. Sensor indicators
This icon is visible when a sensor is connected to S1/Com or S2/
COM terminals.
20. Timer icon
Icon appears during programming schedules,
indicates start time for a program.
21. Program number
Shows the program number when thermostat
follows schedule.
22. S1/COM Sensor indicators
Shows a sensor is connected to the S1/COM
terminal.
23. S1/COM Sensor indicators
Shows a sensor is connected to the S2/COM
terminal.
24. Room/set point temperature
Indicates current room temperature, setpoint
temperature etc.
25. Set point temperature indicator
Icon appears when a new setpoint temperature is
being set.